Preform and Cap Making Machine
Posted on

Model NO.: Injuection Molding
Processing: Bottle Blow Molding Machine
Capacity: 1000-8000bph
Delivery: 40days After Payment
Shipping Term: by Sea or by Train
Warranty: 1year
Certificate: CE,ISO, SGS
Trademark: Blissum
Specification: CE, ISO, CCC, GSG
Origin: Zhangjiagang, Jiangsu. China
HS Code: 8422301090

Full-automatic PET Bottle Blow Molding machine/Blow Molder
Blissum's Bw series are the most stable two-step fully-automatic pet stretch-blow moulding machines(reheat). It has one to six cavities and the maximum capacity of the products is 2L. It can blow bottles in shapes: Carbonated, mineral, pesticide, cosmetics, wide-mouth, hot filling, and other packing containers, which is made of plastic of crystalline type, such as PET and PP etc.
 
Conguration list of PET Bottle Blow Molding machine/Blow Molder 
A). PLC colour display: Siemens(Germany)
B). Pneumatic parts: FESTO(Germany)
C). Controller of preform transfer: Servo motor National(Japan)
D). Other electric parts are all world-famous brand
 
Feature of Full-automatic PET Bottle Blow Molding machine/Blow Molder: 
1. Stable performance with advanced PLC. 
2. Conveying preforms automatically with conveyor. 
3. Strong penetrability and good and swift distribution of the heat by letting the bottles rotate by itself and revolute in the rails simultaneously in the infrared preheater. 
4. High adjustability to enable the preheater to preheat preforms in shapes by adjusting the light tube and the length of the reflecting board in the preheating area, and eternal temperature in the preheater with an automatic thermostatic apparatus. 
5. High safeties with security automatic-locking apparatus in each mechanical action, which will make the procedures turn into a state of safety in case of a breakdown in certain procedure. 
6. No contamination and low noise with the air cylinder to drive the action instead of the oil pump. 
7. Satisfaction with different atmospheric pressure for blowing and mechanical action by dividing the blowing and action into three parts in the air pressure diagram of the machine. 
8. Strong clamping force with high pressure and double crank links to lock the mold. 
9. Two ways of operating: Automatic and manual. 
10. Safe, reliable, and unique design of the position of valve to make the air pressure diagram of the machine easier to understand. 
11. Low cost, high efficiency, easy operation, easy maintenance, etc, with automatic technological process. 
12. Contamination is avoided for the bottle body. 
13. Ideal effect of the chilling with the chilling system. 
14. Easy installation and starting 
15. Low rejection rate: Less than 0.2 percent.
perform
Main specification of BLIM-1700 Screw A Screw B Screw C
Injection Unit
Screw Diameter mm 40 45 48
Screw L/D Ratio L/D 24.7 22 20.6
Shot Volume (theoretical) CM 282 358 407
Injection Weight (PS) g 262 330 378
oz 9.24 11.6 13.3
Injection Rate g/s 100 126 144
Plasticizing Capacity g/s 14 19 23
Injection Pressure MPa 224 176 155
Screw Speed rpm 160
Clamping Unit

Most kinds of plastics could be processed by plastic pyrolysis machines.

the main plastics will be PP PE with high oil output

PVC or PET is not suitable for pyrolysis machines 

there will be Cl generated from its process

when met with water, there will be HCL, 

it is harmful to reactor and all the whole plastic pyrolysis system.


the main process is that by heating the reactor directly, plastics will be pyrolysised into oil gas;

condensers or cooling pipes will cool the gas down into liquid oil with the help of recycling water;

then the rest gas which could not be cooled down into liquid oil will be recycled into reactor heating system; after oil gas coming out completely, stop heating the reactor, and cool down reactor below 70 degrees; then can open the door and discharge carbon black automatically...

there are models with capacities from 5tons to 20tons per batch

LN-2200-6000 capacity of 5-6ton 

LN-2200-6600 capacity of 7-8ton 

LN-2200-8000 capacity of 9-10ton 

LN-2600-6600 capacity of 10-12ton 

LN-2600-8000 capacity of 12-14ton 

LN-2800-6000 capacity of 10-12ton 

LN-2800-6600 capacity of 12-14ton 

LN-2800-8000 capacity of 15-20ton 

if cut into smaller pieces, it could process more.


Waste Plastics

the whole process includes feeding plastics into pyrolysis reactor;

 then heating the reactor and oil gas coming out for some time;

 cool down the reactor; at last open the door and discharge the carbon blacks...


Waste Plastic Pyrolysis Machine

Waste Plastic Pyrolysis Machine,Plastic Pyrolysis Machine,Plastics Pyrolysis Equipment,Scrap Plastic Pyrolysis Machine

Henan Lanning Technology Co., Ltd , https://www.lanningrecycling.com