There are many types of photovoltaic power piling machines, and the working principle of each type is different. Photovoltaic power piling machine can basically be divided into hydraulic piling machine, drop hammer piling machine, steam hammer piling machine, diesel hammer piling machine, in which steam hammer photovoltaic piling machine often needs supporting the use of screw air compressor.
The machine is suitable for piling works such as building foundation construction, high-speed road foundation reinforcement, high-speed railway power facilities, wind power plants, solar photovoltaic power plants, soft soil treatment and reinforcement.
Hydraulic PV power Pile Driver is a multi-purpose highway guardrail steel pipe pile Construction Machinery. With hydraulic pressure as the driving force, the hydraulic pressure can be adjusted according to different soil conditions in the stratum to achieve appropriate impact force for driving. It is a new type of pile driver. According to different configurations, steel pipe piles can be driven in, pulled out, or drilled on the subgrade and stabilization layer before being piled.
Drop Hammer Photovoltaic Power Pile Driver is a kind of pile tube sinking equipment. It has the advantages of simple design, easy installation and transportation, high impact force, stable performance and so on. It is a steel weight, which is lifted by the hoisting machine, and it is lifted off the trailing guide frame. Freefall and piling. All use electric power, without having to buy expensive diesel power.
The main body of the diesel hammer pile driver is also composed of a cylinder and a plunger. The cylinder type diesel hammer uses the cylinder as a hammer seat and directly guides the inner wall of the extended cylinder barrel, eliminating two guide rods. The plunger is a hammer head, which can be The cylinder moves up and down. Its working principle is similar to that of a single-cylinder two-stroke diesel engine. The diesel hammer has a fuel injection pump, a fuel tank, a cooling water tank, and a pile cap attached to the hammer seat. The gap between the plunger and the cylinder is sealed with a resilient plunger ring.
Specification
Drill depth :0-9m
Drill diameter :50-900mm
Geological requirements:soil or soft rock
Photovoltaic Pile Driver Photovoltaic Pile Driver,Hydraulic Photovoltaic Pile Driver,Photovoltaic Solar Pile Driver,Photovoltaic Pile Driver With Crawler SHANDONG HENGWANG GROUP , http://www.hwmac.comRotary Quarter Turn Electric Actuator for Ball Valve, Butterfly Valve 220V AC/110V AC/24V DC
AdvantageÂ
1. High precision and sensitivity
2. Easy to operate with other electric adjustment instruments
3. Simple to install
Â
Enclosure
Weatherproof enclosure IP67, NEMA 4 and 6
Power supply
110 / 220V AC 1PH, 380 / 440V AC 3PH 50 / 60Hz, ±10%
Control power supply
110 / 220V AC 1PH, 50 / 60Hz, ±10%
Duty cycle(on-off)
S2, 100% Max 30Min
Duty cycle(modulating)
S4, 40~70% Max 300~1600 start/hour (Option :100%)
Motor
Induction motor (Reversibe motor)
Limit switches
Open / close, SPDT, 250V AC 16A rating
Additional limit switches
Open / close, SPDT, 250V AC 16A rating
Torque switches
Open / close, SPDT, 250V AC 16A rating
Stall protection/operating temp
Built-in thermal protection, open 150ºC± 5ºC / close 97ºC ±15ºC
Travel angle
90° ±10 (0~110 )
Indicator
Continuous position indicator
Manual override
Declutching mechanism
Self locking
Provided by double worm gearing
Mechanical stopper
2 external adjustable screws
Space heater
10W(110/220V AC) Anti-condensation
Cable entries
Three PF3/4 tap (standard type only)
Lubrication
Grease moly (EP type)
Terminal block
Spring loaded lever push type
Materials
Steel, Aluminium alloy, AI bronze, Polycarbonate
Ambient temperature
-20 ~+70ºC (except option electronic board) (Option : -40ºC )
Ambient humidity
90% RH Max.(non-condensing)
Anti vibration
X Y Z 10g, 0.2~34Hz, 30minute
External coating
Anodizing treatment before dry powder, Polyester
Product Specification
Product Details Show
Product Processing Show
Product Packing
Product Application
Workshop Show
Contact Us
Mob: +86-13600679517; +86-18057721628
Web: www.tychenfluid.comRotary Quarter Turn Electric Actuator for Ball Valve, Butterfly Valve 220V AC/110V AC/24V DC
AdvantageÂ
1. High precision and sensitivity
2. Easy to operate with other electric adjustment instruments
3. Simple to install
Â
Enclosure
Weatherproof enclosure IP67, NEMA 4 and 6
Power supply
110 / 220V AC 1PH, 380 / 440V AC 3PH 50 / 60Hz, ±10%
Control power supply
110 / 220V AC 1PH, 50 / 60Hz, ±10%
Duty cycle(on-off)
S2, 100% Max 30Min
Duty cycle(modulating)
S4, 40~70% Max 300~1600 start/hour (Option :100%)
Motor
Induction motor (Reversibe motor)
Limit switches
Open / close, SPDT, 250V AC 16A rating
Additional limit switches
Open / close, SPDT, 250V AC 16A rating
Torque switches
Open / close, SPDT, 250V AC 16A rating
Stall protection/operating temp
Built-in thermal protection, open 150ºC± 5ºC / close 97ºC ±15ºC
Travel angle
90° ±10 (0~110 )
Indicator
Continuous position indicator
Manual override
Declutching mechanism
Self locking
Provided by double worm gearing
Mechanical stopper
2 external adjustable screws
Space heater
10W(110/220V AC) Anti-condensation
Cable entries
Three PF3/4 tap (standard type only)
Lubrication
Grease moly (EP type)
Terminal block
Spring loaded lever push type
Materials
Steel, Aluminium alloy, AI bronze, Polycarbonate
Ambient temperature
-20 ~+70ºC (except option electronic board) (Option : -40ºC )
Ambient humidity
90% RH Max.(non-condensing)
Anti vibration
X Y Z 10g, 0.2~34Hz, 30minute
External coating
Anodizing treatment before dry powder, Polyester
Product Specification
Product Details Show
Product Processing Show
Product Packing
Product Application
Workshop Show
Contact Us
Mob: +86-13600679517; +86-18057721628
Web: www.tychenfluid.com
Rotary Quarter Turn Electric Actuator for Ball Valve, Butterfly Valve 220V AC/110V AC/24V DC
Control Type: on-off, Passive Contact, Modulating
Con.: ISO 5211, Star Square, Torque, Thrust
Trademark: TYCHEN/OEM
Transport Package: Carton, Plywood Case
Specification: LQ0-05/LQ1-06/LQ1-10/LQ2-16/LQ2-20/LQ2-24/LQ3-35
Origin: Zhejiang
HS Code: 8501400000
Control Type: on-off, Passive Contact, Modulating
Con.: ISO 5211, Star Square, Torque, Thrust
Trademark: TYCHEN/OEM
Transport Package: Carton, Plywood Case
Specification: LQ0-05/LQ1-06/LQ1-10/LQ2-16/LQ2-20/LQ2-24/LQ3-35
Origin: Zhejiang
HS Code: 8501400000