We have many type of log saw,such as CL 700-1,CL700-1A(Trailer Type),CL700-1B(3-Point Link), CL700-2A, and CL700-2B(Trailer Type).We use  two-stage pump which has  industry standards and the qualified rate of 99%.We are a factory and can make machines according to the wishes of our guests. We have more than 10 years of experience in the industry, and the testing of the key parts of the machine is in place to ensure the quality of the machine.

We, LaiZhou Great-Boom Garden Tools Co., Limited, were founded in 2004, we manufacture log saw and log splitter now.
When it comes to petrol log saw, I could say that we are the pioneer who have designed and manufactured
since 2012 in domestic market . Now, we are experienced in practical production and operation and our
products have already been approved by CE (TUV) .As for power , we normally use engine(9hp - 14hp ) in
both Chinese brand and aboard brand Besides , we use high-quality and efficient TCT 700mm blades in
diameter which are approved by GS .
About the log splitter, our main products are both gasoline log splitter and diesel log splitter,
and the tonnage is from 18Ton, 24Ton, 30Ton, 40Ton to 50Ton. Our machine can split from
610mm to 1200mm length log. Their working capacity is from 16inch to 22inch diameter log.
We are the first one manufacturer to use telescopic cylinder in China, our 1050mm type has
applied for design patent. All models have obtained CE, GS, RoHS, EMC certification.
 We can do
1) 7days to finish sample design
2) 20days to 25days for one full container
3) Any Pantone color available
4) 2 years warrantees
5) Special sample available
6) More payment mode for your choice here
7) OEM & ODM

Die Casting Parts:

The casting is a metal human control of hot working process relatively early, has a history of about 6000 years.In early 1700 BC to 1000 China has entered into casting heyday era,the technology has reached a very high level.

the material to be casting is usually solid but heated to a liquid metal (copper, iron, aluminum, lead, tin, etc.), and mold materials can be sand, metal and even ceramics. In response to different requirements, the use of the method will be different.

Different Category:

Casting blank is almost forming, which achieves the goal of free machining or less processing, reduces cost and reduces production time to a certain extent. Casting is one of the basic processes in modern equipment manufacturing industry.

(1) Sand casting:

Using sand as the mold material, also known as sand casting, foundry, including wet sand, dry sand and chemical hardening sand 3, but not all are available in sand casting. Advantage is low cost, because of the use of the mold sand can be reused; drawback is the mold manufacture time-consuming, repeated use casting model is not possible. To damage can be achieved after the finished product.

(2) Special Casting Process:

According to the special casting molding materials can be divided into natural mineral sand as the main materials (such as casting, mud casting, shell casting, vacuum casting, mold casting, ceramic mold casting, special casting and metal) as the main cast materials (such as metal casting, pressure die casting, continuous casting, low pressure casting, centrifugal casting, etc.

2.1 Metal mold casting method: using high melting point is the raw material made of metal mold. The subdivision for gravity casting, low pressure casting and pressure casting method. By casting the melting point can be cast metal has also been limited.

2.2 Lost wax casting method: this method can for membrane casting and solid casting. First the object copy the required casting wax, and then dipped into ceramic containing (or silica sol) in the pool and stay dry, the wax replica covered with a layer of ceramic membrane, repeating the steps until the outer membrane is sufficient to support the casting process (about 1/4 inch 1/8 inch), wax melting in the mold, and out of the mould. Then many times to enhance the mold temperature, the hardness can be used to rear casting.

Based on different casting raw material,we`ve Steel Die Casting,copper alloy die casting and aluminium alloy die casting.

Processing:

(1)The mold preparation (liquid metal become a solid container for casting ) according to the material used can be divided into sand, metal, ceramic, clay, graphite, according to the frequency of use can be divided into single type, semi permanent and permanent mold preparation, quality is the main factor affecting the quality of castings;

(2) The melting and casting;:casting metal (alloy) mainly include all kinds of cast iron, cast steel and casting of nonferrous metal and alloy castings;

(3) The processing and inspection: casting processing including removal of the core and the casting surface removal of foreign body, riser, shovel thorn and sanding fash protrusions and heat treatment, plastic. Anti rust and rough machining.

Die Casting Parts

Die Casting Parts,Steel Die Casting,Copper Die Casting,Aluminium Die Casting

VESTA Motoring Ltd , http://www.vesta-industry.com