Insulating Glass Production Line With Gas Filling Online2535
As the most important process of insulating glass production, we are especially professional in glass cleaning, transmitting pressing and gas filling(optional).The production line can do double glass,triple glass and stepped glass.
Jinan Lijiang Automation Equipment Co., Ltd. have independently produced the vertical automatic IG production line with filling gas on line, the vertical IG sealing robot, the Automatic Spacer Bending Machine, the Automatic Desiccant Filling Machine and the new fully automatic Butyl Extruder Machine, its technology and quality have reached the highest leading level in China. Glass Processing Production Line,Double Glass Machinery,Insulate Glass Processing Equipment,Custom Insulating Glass Machine JINAN KATION TRADING CO.,LTD , https://www.machinerychinese.com
First, shock-proof pressure gauge pointer jitter: 1, measured medium pressure; 2, pressure gauge installation location vibration. Second, the earthquake pressure gauge without instructions: 1, the pressure tube on the shut-off valve is not open; 2, pressure tube blockage; 3, the spring pipe joints within the excessive fouling and fouling; 4, spring pipe cracking; 5, The center tooth and the sector tooth wear too much to mesh. Third, the pressure gauge pressure indication error inhomogeneity: 1, spring tube deformation failure; 2, spring tube free end and sector gear, connecting rod transmission ratio is not properly adjusted. Fourth, shock-proof pressure gauge pointer jump or sluggish phenomenon: 1, the pointer and the surface of the glass or scale touch Capricorn; 2, the central gear shaft bending; 3, two gear mesh with dirt; 4, connecting rod and fan gear The activity screws are not flexible. 5. When the pressure of the pressure gauge is removed, the pointer cannot be restored to zero: 1. The pointer is bent; 2. The spring force is short; 3. The pointer is loose; 4. The transmission gear has a friction. Sixth, the transmission ratio is misaligned. Seventh, the pressure gauge indication is low: 1. The gear ratio is out of adjustment; 2. The spring tube has leakage; 3. The pointer or transmission mechanism has a friction element; 4. The pressure guiding pipeline is leaked. Eight, shock pressure gauge pointer can not be indicated to the upper limit scale: 1, the transmission ratio is small; 2, the movement of the fixed position in the base is not appropriate; 3, the wrong position of the spring tube welding.
Analysis of Common Faults and Problems of Seismic Pressure Gauges
Analysis of Common Faults and Problems of Seismic Pressure Gauges