Shengyang oil boiler

Introduction of organic heat transfer media heating boiler

 

Flame and high temperature smoke produced by complete burning of fuel (coal, oil, gas, etc.) exchange heat with 
organic heat transfer media in the pipe by radiative transfer and convection transfer, at the same time, the organic
 heat transfer media is circulating in the system pushed by the pump. And then the using-heat equipment takes heat
 from the media, which goes back to the boiler after heat exchange. So it is an organic heat circulation system.

Process feature: low pressure and high temperature

Product feature:

1. High temperature in a low pressure

2. Stable heat system

3. Easily temperature control.

3. High heat efficient

4. Excellent operation control system

5. Safe monitor device

6. Less water, electricity, production cost

Technique data

Rated thermal power is 0.12Mw (10×104kcal/h) to 14Mw (1200×104kcal/h).

Design pressure is equal to or greater than 1 Mpa.

Operating temperature is equal to or less than 350°C.

Thermal efficiency is between 60% and 85% according to the difference of boiler type.

Fuel

Coal, water gas, city gas, mixed gas, light oil, heavy oil, residual oil, mixed oil, coal dust, coal water slurry, saw dust, bagasse, straw, waste oil and waste liquid.

Burning system

Coal-fired

Fixed grate combustion, hydraulic jacking system, spiral jacking system, reciprocal grate system, travelling grate system.

Oil-fired

Mechanical atomization system, rotary cup atomization system, set cup atomization system, steam atomization system, air atomization system.

Gas-fired

Fuel gas filter, pressure switch, Gas pressure regulator, leak detection pump, solenoid valve.

Application of thermal oil industrial heating boiler:

Chemical: polymerization, condensation, distillation, concentration, evaporation, fusion

Fat: decomposition, deodorization, distillation of aliphatic acid, heating, hydrogenation,

           esterification.

Petrochemical: rectification, heating, thermal insulation

Plastic&Rubber: hot-press, calender, extrusion, vulcanization molding, artical leather manufacture

Textile staining: heat setting, dry, curing

Fiber: polymerization, fusion, mould pressing, thermosetting, extension, dry

Carbon: bitumen fusion, dripping, mixing,molding

Wood: veneer, MDPE,HDPE,lamination flooring,birch hot-pressing, drying

Metal: pickling, electroplate, coating, oil bath, heat-treatmen

Coating: basting and drying, vehicle, plane, hot forming, hyperthermia bonding, drying

Construction: highway hitumen, dissolving, thermal insulation

Cement: fuel heating

Electric: resin impregnation, melting&holding

Air-condition: radiant heating

Others: different application of high temperature heat source below 350°C.
packing&shipping
We can send the goods you ordered with well packing container from Qingdao Port.

Our service 
There are complete Pre-sale services, After-sales service, Technical service and communication, Delivery.

Our staff of sales and technical support is available to help you in selecting the right machines for your application;

Also according to the actual requirements provide solutions with clients.

Services:

Pre-sale services:

1> Provide the free consultation of the equipment

2> Provide the standard device and the flow chart

3> According to the clients' special requirement, offering the reasonable plan and free design helping to select the equipment.

4> Welcome to visit our factory

Services during the sales:

1> Inspect the machine before leaving the factory.

2> Oversea install and debug the equipment.

3> Train the first-line operator.

After sale services:

1> 24 hours online service

2> Provide the VIDEO with Install and debug the equipment

3> Provide technical exchanging

Our factory:



 

Linyi Lanshan Shengyang Wood-based Panel Machinery Factory

   

 

    Linyi Lanshan Shengyang Wood-based Panel Machinery Factory,founded in 1996,is a professional manufacturer
which developed and manufactured all kinds of man-made machinery and equipments.Our main products are Fully
automatic particle board production line,Melamine laminate hot press machine,Short cycle lamination hot press
machine and variety of new high-end hot press machine,cold press,dryer,Planking machine,Saw machine...etc. full
set wood-based panel production machinery and equipments.

 

    After more than twenty years' continuous innovation and development, Shengyang Machinery has become an
outstanding enterprise along with strong power, advanced technology and excellent quality. Products are sold nationwide,
exported to Asia, Europe, Africa and Oceania...etc. more than 20 countries and regions, also supported and praised by
clients and friends all over the world.

 

    Shengyang machinery first passed ISO9001-2000 international quality certification system in the same industry,
and also has repeatedly been rated as "municipal contract and trustworthy enterprise", "scientific and technological
innovation Star Enterprise" and other honorary titles.

 

    We "Shengyang Men" always adhere to "succeed through quality, walk on the path of development of superior
quality and high efficience" as business philosophy, "to have a foothold in China and head for the world" as development goal,
"honesty first in business, being man before on business" as Shengyang Spirit. We will carry on serve you with the more
excellent products' quality, more stringent management system and much better service system, and hand in hand, and share
success with you.

 

   Trust us! Once cooperative, long-term friends!

 

   All we "Shengyang Men" welcome your visit!
FAQ

If you have any questions of the machine, do not hesitate to contact me.

I will try my best to offer you help.