6040 Hand Baggage & Medium Size Parcel Scanners for Prison Use
Posted on

6040 Hand Baggage & Medium Size Parcel Scanners for Prison Use

General Specifications:

Tunnel Size : 600 (W) × 400 (H) mm
Power Requirement: 220V AC (±10%) 50±3Hz
Power Consumption: 1.0KW (Max)
Noise Level: <60dB
Conveyor Speed: 0.22m/s
Conveyor Max Load: 150 kg
Wire Resolution: 40AWG
Spatial Resolution: 1.0mm Horizontal and Vertical
Steel Penetration: 40mm
Single Inspection Dosage: <1.0μGy
Leakage Radiation: <0.1µGy/h
Film Safety: Guaranteed ISO1600 Film

X-Ray Generator Specifications:

Tube Current: 0.7~1.2mA
Anode Voltage: 140~160kV
Detector: L-shaped Array
Cooling: Sealed oil bath with forced air
Duty Cycle: Rated for 100% Duty Cycle
Beam Angle: 80°

Computer Specification:

Processor: Intel Core i3-4340 (Dual-core, 4-thread), 3.6GHz, 22nm, 54W
Memory: 4GB DDR3 Laptop Memory
Hard Disk: 1TB

Image Display Features:

  • 19” High Resolution LCD Monitor
  • Display Resolution: 1280 x 1024, 24-bit Color
  • Contrast Sensitivity: 24 Visible Levels, 4096 Gray Levels
  • Image Storage: Up to 100,000 Images in Real Time
  • Zoom: 64x Magnification, Full Screen Observation
  • Multi-Energy (M) Color Material Identification: Organic in Orange, Inorganic in Blue, Mix in Green
  • Edge Enhancement: Sharper Object Contours
  • Super Image Enhancement: More Detailed Image Clarity
  • High Penetration Display: Enhanced Bright Areas for Better Visibility
  • Low Penetration Display: Enhanced Dark Areas for Clearer Detail
  • Brightening/Dimming: Adjust Image Brightness as Needed
  • Image Recall: View Previous 20 Images for Review
  • Image Restoration: Reset to Original Settings
  • Assists in Detecting Drugs and Explosive Powders

Special Features:

  • Network Interface: Supports LAN Connection for Multi-Terminal Operation
  • Safety System: Automatically Controls X-ray Emission for Safety
  • One-Key Shutdown: Simple Rotation for Quick Machine Turn-Off
  • Eagle Eye: Enables Easy Viewing of Magnified Areas
  • Self-Diagnosis: Alerts for Malfunctions for Prompt Maintenance

Environmental Specifications:

  • Operating Temperature/Humidity: 0°C ~ 45°C / 20% ~ 95% (Non-condensing)
  • Storage Temperature/Humidity: -20°C ~ 60°C / 20% ~ 95% (Non-condensing)
Photo:
6040 Hand Baggage & Medium Size Parcel Scanners for Prison Use

Selective Laser Sintering - Sls

Stereo Light Curing Molding - Sla

It mainly uses photosensitive resin as a raw material, and utilizes the characteristic that liquid photosensitive resin will cure quickly under ultraviolet laser beam irradiation. The photosensitive resin is generally liquid, and it immediately initiates a polymerization reaction and completes curing when irradiated with a certain wavelength of ultraviolet light (250 nm to 400 nm). SLA focuses on the surface of the light-curing material by focusing ultraviolet light of a specific wavelength and intensity to solidify it sequentially from point to line and from line to surface, thereby completing the drawing of a layered cross-section.

Sls Printing

Selective Laser Sintering - Sls,Sls 3D Printing Service,Laser Sintering 3D Printing,Selective Laser Printing

Ningbo Rongna Technology Co.,Ltd , https://www.prototyping-machining.com