In some areas, especially in some rural areas of China, the status of mobile stage cars can often be seen. The emergence of the mobile stage car and its popularity have provided a relatively convenient stage for some performers to a certain extent. As far as the average friend is concerned, there may not be much knowledge of some knowledge of the mobile stage car. The following is a brief introduction to the development of the mobile stage car.

As far as the current situation is concerned, there are mainly three kinds of deployment methods for common mobile stage cars:

1. One-sided expansion: This deployment method is to build a stage on the side of a mobile stage car. In general, this approach is mainly the diversification of the development of the roof. Generally used is a fixed side, and the other side is connected with the side car panel, and then the overall lifting. In addition to this approach, there is also a built-in foldable stage board that can be opened simply by using these stage boards.

2. The way of bilateral expansion: unlike the single-sided deployment, this method generally lifts the top of the floating stage car as a whole. The left and right side panels of the vehicle are deployed to the right and left by the action of hydraulic cylinders, and are formed with the top plate. A relatively large visor. If the mobile stage car uses a built-in stage folding plate, it is necessary to operate the hydraulic cylinder to realize the unfolding, gathering and arrangement of the stage part. When not in use, you only need to close the car's left and right side panels.

3. The three sides can be developed in a way: The use of a three-faced mobile stage vehicle can make the area of ​​the stage reach 36 to 48 square meters. The general three sides include the top plate and the car's two sides of the car. At the time of use, the entire body is lifted, and then the hydraulic panels are used to unfold the car panels on both sides, forming a complete stage with the already deployed roof panels. In addition, if your mobile stage car is going to use a built-in folding stage board, you can use the hydraulic cylinder on the car to start the stage and gather it. Compared with the unfolding method on one side and on both sides, the stage formed by this deployment method is more stable and the resistance to wind resistance is stronger.

Expanding on one side, unfolding on both sides, and unfolding on three sides, this is the way the author introduced the mobile stage car. If you want to get a deeper understanding, you may wish to read the above, I believe you will gain something. Hope that these introductions can help you.

Features
Custom Made --- Full coverage, beautiful
High Border --- Prevents drink, water, sand, mud from dirtying car carpet.
Waterproof Materials --- Made of waterproof materials can be used in all weather and easy to clean.
Warranty
1 year warranty on this product protects against manufacturer defects excluding wear and chemical contamination, Original Invoice required.
Materials
Compose of 3 layers of the materials into one by heat pressing technology, and the materials are environmental-friendly and waterproof.
Top layer: PU Leather
Middle layer: Foam material XPE
Bottom layer: Special anti-slip material (PVC)
Cleaning Methods
Clean by vacuum cleaner.
Clean by water, naturally dry.
Use regular detergent.
Don't use washing machine.
Note:  Actual product color may have color shading with the colors shown on the pictures due to such factors as monitor settings, viewing environment, viewing angle.

Trunk Liner

Car Trunk Liner, Car Cargo Liner, Car Trunk Mat, Car Trunk Cover, Car Cargo Cover

Shanghai Uwin Automotive Product Co.,Ltd , https://www.uwinoffroad.com