What paint is the least easy to draw? What you need to know before choosing

For car paint, many consumers will have a lot of opinions. When choosing a different car paint, you will also have your own priorities.

In fact, there are not many kinds of common automotive paints. They are ordinary paint, metallic paint and pearlescent paint. If you pay a little attention, you can easily understand the characteristics and advantages of various types of paint. Today, we will use some of the mainstream paints today as an example to tell you about the advantages and disadvantages of different paints.

● What are the common automotive paint types?

There are about three common topcoats on the market today: ordinary paint, metallic paint, and pearlescent paint. Ordinary paint is the most common one and it belongs to the most basic car paint. Its synthetic materials include resins, pigments, and additives. For example, the most common white, red, and yellow are common paints. The metallic paint has more aluminum powder and it looks bright in the sun.

Pearlescent lacquer is added with mica granules. Mica is a very thin piece of material. Reflective directionality leads to colorful visual effects. Pearlescent paint is the best of the three types of paint and is also the best reflective. It also has the most ingredients and strong anti-oxidation ability, and it usually appears on high-end models. However, such paint repair is more troublesome and the cost is relatively higher.

In addition, the prices of paints of different colors are also very different. For example, the first-class brand red paint is about 25 times more expensive than the first-class brand titanium dioxide, and the amount of titanium dioxide in the white paint is about 5 times that of the red paint. Therefore, the cost of red paint in color is 5 times higher than that of white paint. This is why some models have less color varieties.

● Automotive paint manufacturing process

The automobile paint is divided into two types according to the spraying process. One is a single process and the other is a double process. The single process is a common paint, and the metal paint is a double process. Metallic paint can provide particles, which contain aluminum powder looks good. However, the metallic paint must be varnished on the surface in order to be shiny and hard to reach the protection against oxidation.

The plain paint can be molded once again because it is considered to be a colored varnish in terms of composition, thus eliminating the need for a spray varnish step. Taken together, the principle of the two paints is basically the same, but multiple processes bring better visual effects.

In fact, regardless of the color of the paint, the paint will fade in the sun. The additives in the paint are important, such as light stabilizers, antioxidants, and the like. In many cases, the factory is more concerned with the uniform fade and try not to make the color difference in the body part.

● The advantages of metallic paint and common paint

In fact, metal paint is mixed with metal powder in the paint. This will not only make the surface of the painted part look sparkling, but will also change the contour of the body due to the refraction of light at different angles. The appearance of the vehicle looks more abundant.

Another reason for the increasing popularity of “metallic paints” is the blending of metal powders. With the increased hardness of metal paints, paint surfaces are relatively less likely to be scratched. This can only stop the car for the most part. In outdoor open-air parking lot owners, minor scratches can't damage the paint and reduce the worry and expense of more paint and paint.

Some "plain paints" are mostly plain paint. The most typical colors are white, big red, and yellow. In fact, it does not mean that these colors of paint can not add silver powder, but the color after the addition of silver powder is not the original positive color. White will turn into pearl white, black will become "carbon black" with light, red will become the so-called "red wine," and yellow will turn into glittering "golden."

Without the plain paint added with metal powder, the hardness of the paint surface is relatively soft. If the high-speed traffic is hit by the flying stone that the road surface bounces off, the paint surface is easily peeled off. In addition, the plain-painted vehicle must not be wiped directly with a dry cloth or a damp cloth when cleaning, and a large amount of fresh water must be used to wash away the dust that adheres to the surface of the paint, so that when the cloth is not in contact with the body, it is not allowed. Hard ash sand scratched car paint.

● The problem of future touch-up

The problem of refinishing paint in the future is hardly noticed by consumers because no one wants to think about the small things that may happen in the future. However, it is inevitable that the daily driving scratches the car paint. This is an embarrassment that the car has to face.

In fact, all colors and types of car paint can be repaired as the same, a large area to paint off the repair shop, a small area of ​​damage to buy their own paint pen will be able to make up. However, the premise is that your car body color is not too bizarre, such as very rare personality color is difficult to accurately find the same touch up pen color, to some extent, add the difficulty of DIY.

In addition, the prices of different kinds of paints will be different in the future. Although we described earlier that metallic paint is harder, if your metallic paint is damaged, it takes more expensive than normal paint to replace the paint. The reason is simple, that is, the manufacturing process of metallic paint is more complicated.

● Paint Tips

1 In addition, given that new cars are often sold quickly. The car you got was probably just a few days out of the depot. The baking paint has a characteristic, generally lags behind for a while to be really firm and hard, so the new car do not rush to wax, after three months, do not use hard wax. If you make up your car daily, it is best not to wash your car within one week.

2 For everyday cars, the materials with acidity are more lacquer, such as rain, snow, bird droppings, etc., which can easily make the car tarnish. If guano is not cleaned for a long time, the paint will be yellow and dark. Therefore, hard washing is one of the best ways to avoid the aging paint.

3 Car Refinisher recommends that you go to a special repair shop or 4S shop, but do not be fooled by sales staff, such as the repair shop tells you to use the "original paint", then he must be lying. Because all the places are even included in the original factory, after the car is installed, it will not use any "original paint." The reason is very simple, because after baking a good paint and baking at a temperature of 200°C, so many parts on the finished car can withstand high temperatures of 200°C? General refinishing paints use a special refinish paint baking temperature is relatively low, 7,80 The appearance of °C.

Summary: In fact, there are not many kinds of common car paint on the road, and these types can be distinguished by clear features. As long as you pay a little attention, you can easily grasp the characteristics and advantages of various types of automotive paints, and you no longer have to worry about paint choices when buying a car.

Crawler Excavator

Crawler Excavator,Mini Crawler Excavator,Mini Hydraulic Crawler Excavator,Crawler Excavators 800Kg

Shandong Hexu Engineering Machinery Co.,Ltd , https://www.sdhxmachinery.com