API 6D Cast Steel High Pressure Double Disc Flat Plate Slab Gate Valve

Model NO.: Z43
Thread Position of Valve Rod: Outside Gate Valve
Usage: Regulation, Safety, Emptying, Drain, Temperature Control, Flow Control
Standard: API 6A, API 6D, DIN, ISO
Application: Industrial Usage, Water Industrial Usage, Household Usage
Bonnet: Bolted Bonnet, Pressure Seal, Welded Bonnet
Wedge: Solid, Flexible Wedge;Single Wedge, Double Wedge
Seat: Renewable Seat, Back Seat
Stem: OS&Y, Rising Stem, Non Rising Stem
Cryogenic Service: Extended Bonnet for Cryogenic Services
Design: ASME B16.34, API 600, API 6D, BS1414
Bore: Full Port Design
Connection: Flanged or Butt-Welding End
Operation: Hand Wheel, Bevel Gear, Pneumatic, Electric
Special: by Pass on Request, Nace Mr-0175
Trademark: O. E. M or AEA Brand
Transport Package: Plastic+Wooden Case
Specification: 1500*1500*2000mm
Origin: China
HS Code: 848180
AEA Slab Gate Valve also named "Through Conduit Gate Valve" are manufactured and tested in accordance with the API6D standard.Slab Gate Valves are manufactured with a full bore port, rising stem OS&Y and with floating seats and gate, pressure energized, for a bubble tight shut off upstream and downstream under both low and high differential pressure. Double block and bleed capability and automatic relief of excess body pressure are a standard feature of this seat design. The smooth, continuous bore minimizes turbulence within the valve and when in the open position it produces a pressure drop equivalent to a portion of pipe of the same length and diameter. The seat faces are outside the flow stream and therefore protected from the erosive action of the flow. Pigs and scrapers can be run through the valve without damage.

PRODUCTION RANGE FEATURES
Slab Gate Valves are available in sizes and pressure ratings as follows:
•Class 150# from 2″ through 64″
•Class 300# from 2″ through 64″
•Class 600# from 2″ through 64″
•Class 900# from 2″ through 48″
•Class 1500# from 2″ through 42″
•Class 2500# from 2″ through 24″

APPLICABLE STANDARDS 
Slab Gate valves comply with API 6D / API 6D SS and all relevant international codes:
•ASME B16.34
•ASME B16.25
•ASME B16.47
•Nace MR01.75
•ASME VIII Div. 1

VALVE MATERIALS 
Slab Gate valves are manufactured using a wide range of materials, from carbon steel to alloys.
A typical material selection is as follows:
Size NPS 2″~48″
Pressure Rating Class 150~1500
Material WCB,LCB,CF8,CF8M,CF3,CF3M
Design & Manufacturing Standard ASME B16.34,API 6D
Face to Face ASME B 16.10,BSEN 588,API 6D
End Connection ASME B16.5,ASME B16.47,BSEN 1092
Test Standard ISO 5208,API 6D,BSEN 12266
Structure Type Single Gate with/without through conduit,Double Gate with/without through conduit
Operation Method Manual,Worm Gear,Electric Actuator,Pneumatic Actuator
   
Materials of parts  
Body WCB/LCB/CF8M/CF8/CF3M/CF3/WC6/WC9/CD3MN
Bonnet WCB/LCB/CF8M/CF8/CF3M/CF3/WC6/WC9/CD3MN
Disc A105+ENP/LF2+ENP/F304/F316/F304L/F316L/F51
Seat A105+ENP/LF2+ENP/F304/F316/F304L/F316L/F51
Stem F6a/F304/F316/F304L/F316L/F51
Seal ring PTFE/NYLON/PEEK/TEFLON
Sealing surface material 1~12 Trim material
O-ring VITON/NBR
Bolt B7M/B8M/L7M/B16M
Nut 2HM/8M/7M/4M
Spring 17-4PH/Inconel
Stem nut C95200/D2/A536
Gasket Flexible graphite+304/Flexible graphite+316
Packing Flexible graphite/PTFE

API 6D Cast Steel High Pressure Double Disc Flat Plate Slab Gate Valve

API 6D Cast Steel High Pressure Double Disc Flat Plate Slab Gate Valve

Features of Through Conduit Slab Gate valve

Typical Advantages
•Negligible Pressure Drop
•Self - Relieving
•Double Block and Bleed performances
•Equalized Bore (as required/operated)
•Possibility of reverse acting and
equalized bore for fail closed operation
•Double seal upstream by piston effect, down-stream with floating obturator
•Superior Seal Per formances (Bubble Tight)
•Suitable for all types of fluids (including abrasive fluids)
•Suitable for ESDV/BDV applications and Pig Traps
•Extremely flexible actuation with or without stem ejection assistance
•Robust Construction
•Full In-Line maintainability
•Fire Safe construction

Stem/Stem seal
The stem is designed with a threaded-in T bar allowing relative motions of the gate under line pressure. The stem seal uses braided graphite gaskets ensure sealing integrity. Stem sealant injection system is achieved through a por t located on the bonnet. In case of leakage through the stem seal it is possible to inject the sealant through the stem packing release valve.

Seat
Seats are ENP coated and are provided with thermoplastic soft inser t on their face.
A "double face seal" effect is obtained due to metallic contact between the seat and the gate, thus increasing the reliability of the valve. Metal-to-metal seating is available for abrasive ser vice. In such case gate and seat faces are coated with HVOF Tungsten Carbide coating.

Fire-safe design
AEA Through Conduit Slab Gate valve is available in the API 6FA fire-tested design. Fire-tests have been witnessed and cer tified by independent authorities. Fire tested gate valves offer the highest resistance against fire. The body seal is a spiral wound graphite/AISI 316 gasket and the stem seal is a die-formed/braided graphite packing. The stem incorporates the back seat feature to allow stem seal re-packing with valve in ser vice. Fire-tests cer tification is available and can be provided upon request.

Fully Piggable
AEA Through Conduit Slab Gate Valves are designed to be Fully Piggable. Pigs and scrapers can be run through the valve without any damage to the internal structure of the valve.

Easy maintenance
Through Conduit Slab Gate valve design minimizes and eases the maintenance allowing for the ser vice operations to be done without the removal of the valve from the line.

Double Block and Bleed Double block and bleed capability and automatic relief of excess body pressure are standard features of Through Conduit Slab Gate Valves. With the valve fully closed and pressure on both sides, it is possible to bleed the pressure from the body cavity to check seat seal integrity and to achieve double isolation between the two sides and avoid any risk of product contamination

Single piston effect seats
Seats rings are floating type and are energized against the gate by means of helical springs. The initial seating is enough to assure sealing between gate and upstream seat when the line pressure is applied. The gate allows axial movement and the upstream force derived from line pressure force the gate against the downstream seat creating a double, bubble tight barrier.

Additional features (Available on request)
• Metal seated/Tungsten Carbide coating for abrasive fluids
• Stem extension for buried ser vice/high temperature ser vice
• Inconel 625 cladding of the sealing sur faces for corrosive ser vice
• CRA alloys for ver y corrosive media (Duplex,UNS S31254,UNS S34565)
• Seat Sealant Injection system for Emergency Sealing
• Transition Pipe Pups welded to the valve ends
• Position indicator
• Actuation (Electric, Pneumatic and Hydraulic actuators)

Self relieving features
The single piston design with the possibility of both seats and gate to float, permits the automatic release of any overpressure in the body cavity.
Consequently, the seat rings are "self-relieving". 



API 6D Cast Steel High Pressure Double Disc Flat Plate Slab Gate Valve
 
Why Choose us?
1.      Factory: 
AEA VALVE, a specialist manufacturer, established since 2008 and professional production of industrial valves over 10 years.
2.      Regional Sale: 
We provide specialized sales service refers to different kind of region all over the world. Each sales team member is good at the local language and well experienced to the responsible market. For example: Russian, German, Spanish, Japanese, etc.
3.      Low MOQ: 
Our factory owns the casting company by itself. We are always ready for providing the sample and producing some small orders, in order to meet the business well.
4.      OEM or Customize: 
OEM Service or Customized size is Available. 
5.      We can make the products with the client's demand standard or the custom requirement.
6.      Complete Solution: 
We are always ready to hear from you, be responding to your enquiry immediately. Our trade manager is always online for you.
7.      High Quality: 
We have strict quality control system and amounts of testing equipments for different kind of valve, such as size, pressure, working environment etc. We are winning the market reputation with the time goes by.
8.      Quick Delivery: 
We have the large stock for some hot products.
9.      Competitive Price: 
10.  We are the manufacturing company which not only has our own manufacturing workshop, but the casting company as well. We provide the straight factory price and service to our customer.
11.  Quality control:
All the products are calibrated with real working condition, and tested before shipping as qualified product. 
12.  Problem solve:
If you can't solve the problem in your local, please delivery the product to us, we will repair it and then back to you. 
13.  Integrity: All the warranty and guarantee from us will be put into come true
14.Online Service: any inquiry, please contact with email:  . We will reply you within 12 hours.