JINAN BEST CNC MACHINERY CO.,LTD , https://www.jinanbestcnc.com
Introduction to the features of Lever Float Steam Traps
Leveraged float steam trap biggest advantage is not affected by pressure, temperature, condensate flow fluctuations, continuous drainage, water that row, the minimum supercooling is 0 ℃, the heating equipment to achieve the best efficiency; Lever float steam valve seat is always below the level to form a water seal, no steam leakage; its minimum working pressure 0.01Mpa, the maximum back pressure rate ≤ 85%; internal with exhaust, lever float Steam trap using the most advanced membrane element as an automatic exhaust valve, can automatically exclude non-condensable gas, very sensitive, high quality work, long service life. The steam trap is designed with a balanced double-valve seat structure and can achieve small volume and large displacement. It is especially suitable for the drainage and drainage of large-scale heating equipment and heat exchange station equipment. It is the preferred steam trap for large heating equipment. The valve uses dual valve holes, the valve core in the valve opening pressure is relatively reduced, so as to obtain large displacement. Float with the work of the liquid chamber with the liquid level changes up and down, driving the lever to open or close the valve seat. As the valve seat hole below the condensate water level, the formation of water seal, water, steam natural separation, to achieve no steam leakage.