Dump trucks need to pay attention to the operation

Some owners did not correctly use the vehicle's operating specifications after they bought the dump truck. After that, the vehicle would have various breakdowns, causing the dump truck to fail. Work was done and caused a loss. Therefore, after the owners have taken the vehicle back, they must be careful to watch the manual for the use of the vehicle. When the dump truck is used, should it pay attention to those operations?

1. Dump trucks must not flush water into the hydraulic tank when cleaning. Normally, it is necessary to check the height of the hydraulic oil surface at regular intervals. When the hydraulic oil is insufficient, it must be filled immediately. There must be no oil leakage in all the oil line joints.

2. Regardless of whether the power take-off device or the gear is disengaged, the clutch pedal should be depressed. If the multi-way reversing valve and the power take-off device are under working conditions, then the garbage truck cannot be driven. State.

3. Dump-type garbage trucks cannot put the construction waste of a building into the carriage. This will cause damage to the machine.

4. The pressure regulating device of the dump truck's hydraulic system is a pressure regulating bolt for the multi-way reversing valve. The bolt is after professional calibration and is locked. When it is used, it is You can't arbitrarily mobilize yourself. And users cannot adjust the hydraulic pressure as they like.

5. When the vehicle is inspected and repaired, care must be taken to avoid bumps and scratches, deformations, and damages of parts. When assembling components, care should be taken to clean them.

6. The one-way throttle valve of the dump truck is used to control the speed of the hydraulic cylinder. After the device is set and locked, it cannot be arbitrarily transferred.

7. When the hydraulic system of the vehicle has an abnormality during operation, it is necessary to immediately stop the operation. After the failure is analyzed and eliminated, the normal operation can be performed. The forced pressure operation should not be performed.

Full hydraulic pressure drive, electrical and oil dual-purpose, safe and reliable work, high efficiency, low labor intensity; Adopts hydraulic cylinder Telescopic Crane boom, work more safety and reliable. Easier to operate,  Easier to maintain, More energy-efficient and environmental friendly.

The most popular crane model in China. Equipped with FOTON or KAMA truck chassis. Max boom length can reach 36 meters. Yuchai, Yunnei engine. Wide outrigger span and telescopic frame can ensure a safety working performance.

Truck Mounted Crane

Truck Mounted Crane,Small Truck Mounted Crane,Vehicle Mounted Crane,Mini Truck Mounted Crane

Jining Sitong Construction Machinery Co.,Ltd , http://www.cntruckcrane.com