The CNC Turning process is a digital manufacturing process that is implemented by computer numerically controlled (CNC) machines. This process is used to produce parts with complex shapes, and the manufacturing process involves multiple steps. The following are the detailed steps of the general CNC Turning process:Design: First, you need to design a CAD model of the parts you want to produce. A CAD model is a three-dimensional image created using computer-aided design software that can describe the shape, size, and features of a part.Programming: Next, you need to convert the CAD model into G-code, which is a type of computer instruction that controls the movement and operation of the CNC machine. G Code can be written manually or generated automatically using CAM software.Prepare the machine: Before you start machining, you need to check and prepare the CNC machine. This includes checking the machine's coordinate system, setting tools and cutters, and setting parameters such as the machine's speed and feed speed.Processing: After the machine is ready, the processing can begin. The machining process usually consists of multiple steps, such as roughing, finishing and drilling. At each step, the CNC machine moves tools and workpieces according to instructions in the G code to achieve the desired cutting operation.Inspection: After processing, the parts need to be inspected to ensure that they meet the design requirements and specifications. Inspection can be carried out by using measuring instruments, templates and other testing tools.Polishing and surface treatment: Parts can be polished and surface treated if needed to improve their surface finish and corrosion resistance. This can be done through the use of abrasives, chemicals and other tools.In short, the CNC Turning process is a high-precision, high-efficiency manufacturing process suitable for the production of parts with complex shapes. Through the control of CAD model and G code, the precise control of machine motion can be realized, so as to achieve high-precision parts processing.
Cnc Turning Machine,Machined Metal Parts,Cnc Turning Service,Cnc Turning Parts Shenzhen ganzoo prototype manufacture co.,ltd , https://www.gz-proto.com
Working fire in Palatine, 12-23-20
On Wednesday morning, Palatine firefighters responded to a fire at the Woodhaven Apartments located at 15 B Dundee Quarter Drive. Engine 82 arrived first and spotted heavy flames on the third floor as they entered from Dundee Road. They immediately launched a blitz attack using their deck gun while crews pulled lines for an interior assault. The attic was fully engulfed, with flames visible through the roof. As additional units from Palatine arrived and deployed more lines inside, the majority of the fire was quickly brought under control.
The building featured a mansard roof, which raised concerns about hidden fires and potential spread across the fire wall to adjacent structures. Ventilation holes were cut into the B-side mansard, and flames were again seen through the roof as Arlington Heights Tower 1 prepared to deploy a master stream. However, interior crews managed the remaining fire, and the master stream was not needed. At one point, Palatine Quint 83 used a master stream to wash down the exterior in sector A to prevent any further spread.
Firefighters from Long Grove, Buffalo Grove, Arlington Heights, and Rolling Meadows provided mutual aid at the scene. The incident highlighted the challenges posed by complex roof structures and the importance of quick response and coordination among multiple departments. Emergency services worked efficiently to contain the fire and ensure the safety of residents.
A photo of the burning building with its distinctive mansard roof was taken by Larry Shapiro and shared as part of the coverage. Additional images from the scene are available in a gallery, offering a visual record of the event.